"ULTIMA" Vegetable Oil

Does not contain toxic item nor pollution item. Friendly to the health and environment. It is specially refined vegetable oil for micro-mist metal cutting. For Semi-DRY CUT SYSTEM, use “ULTIMA”exclusively. To all types of Semi-DRY CUT SYSTEMS, l lit. “ULTIMA”Vegetable Oil is provided.

Why "ULTIMA" shows so wonderful performance?
It is generally accepted that vegetable oil has much larger lubricity than mineral oil. "ULTIMA" is specially refined for micro-mist metal cutting. When "ULTIMA" micro-mist is blown out to the cutter, it covers the blades with molecule film. Thus, the blades are protected and are well lubricated. This is the reason of excellent cutting power and long tool life. The heat generation is prevented as well.

Applicable Machines:
Alloy Steel, Stainless Steel, Hardened Mold & Die material, Aluminum and non-ferrous metals, Titanium, Magnesium and other exotic materials and plastics.

Semi-DRY CUT Features:
1) Can be used to all metals and plastics.
2) Even on the surface of aluminum and non-ferrous metals, no stain is left.
3) Especially in finishing, small chips are blown away by air and very fine surface is obtained.
4) Tool life is extended.
5) Cleaning process can be eliminated or largely reduced.
6) 99% Biodegradable in 10 days

Container:
1 lit. Bottle, 5 lit. Bottle, 18 lit. Pail.

ULTIMA LIGHT:
In case of through spindle or through turret using DC-S4, ULTIMA LIGHT is suggestend. More fine fog will be generated.

Effects on various machinings and materials:
Alloy SteelStainless
Steel		Hardened Mold
HRc40〜45		AluminumNon-Feffous
Drill < 3GoodGoodGoodGood
Drill 4-6GoodNormalGoodGood
Drill > 7NormalNormalNormalNormal
Tap < M3GoodGoodGoodGood
Tap > M4NormalNormalGoodGood
EndMill < 2ExcellentExcellentGoodExcellentExcellent
EndMill 3-12GoodGoodGoodGood
EndMill > 13NormalNormalNormalNormal
Ball End M0.5-0.1RExcellentGoodExcellentGood
ReamerNormalNormalNormal
SawGoodGoodExcellentGood
Parting-off (Lathe)ExcellentExcellentExcellentExcellent

▲TOP